Note: This article lists the technical specifications of the YubiKey C Nano FIPS (4 Series). If you're looking for deployment considerations, refer to this article. If you're looking for a usage guide, refer to this article.
The YubiKey C Nano FIPS (4 Series) is a FIPS 140-2 certified (Overall Level 2, Physical Security Level 3) device based on the YubiKey 4C Nano. It has five distinct sub-modules, which are all independent of each other and can be used simultaneously. Note: Some software such as GPG can lock the CCID USB interface, preventing another software from accessing sub-modules that use that mode.
Interface
The YubiKey C Nano FIPS (4 Series) uses a USB 2.0 interface. All of the sub-modules are available through this interface.
Applications
OTP
The OTP sub-module contains two programmable slots, each can hold one of the following credentials:
- Yubico OTP
- HMAC-SHA1 Challenge-Response
- Static Password
- OATH-HOTP
USB Interface: OTP
U2F
The U2F sub-module can hold an unlimited number of U2F credentials and is FIDO certified.
USB Interface: FIDO
OATH
The YubiKey FIPS (4 Series) can hold up to 32 OATH credentials and supports both OATH-TOTP (time based) and OATH-HOTP (counter based). Accessing this sub-module requires Yubico Authenticator.
USB Interface: CCID
PIV (Smart Card)
This sub-module provides a PIV compatible smart card. On Windows, the smart card functionality can be enhanced with the YubiKey Smart Card Minidriver.
Supported Algorithms:
- RSA 2048
- ECC P256
- ECC P384
USB Interface: CCID
OpenPGP
This sub-module implements version 2.0 of the OpenPGP Smart Card specification which can be used with GnuPG. For key sizes over 2048 bits, GnuPG version 2.0 or higher is required.
Supported Algorithms:
- RSA 2048
- RSA 3072
- RSA 4096
USB Interface: CCID
Physical Specifications
Form Factor
Connector: USB-C
Dimensions: 12mm x 10.1mm x 7mm
Weight: 1g
Temperatures
Operational range: 0 °C to 40 °C (32 °F to 104 °F)
Storage range: -20 °C to 85 °C (-4 °F to 185 °F)